Design & Temporary works

Casagrande XP360

SoILmec SR95

Our SR-95 rig can operate in rotary and CFA modes and is the extended mast version with wider tracks for stability, has remote tracking for loading/unloading and a dual auger cleaner to improve cleaning efficiency. In rotary (LDP) mode it can be fitted with a locking kelly bar to bore to depths of 70m at diameters ranging from 600mm to 1900mm. In CFA mode it can be configured in multiple configurations (4 line and 2 line) to meet site requirements. CFA bored lengths of up to 34m and diameters ranging from 350mm to 1200mm can be achieved.  The rig has a weight of about 100tonnes and has a Euro stage V engine.

Super Kitten

This rig is ideally suited for extremely restricted sites. It has been designed to fit through a standard doorway of width 700mm. Capable of drilling case and auger piles up to 340/300mm diameter to depths of 23m and SFA piles up to 300mm diameter to depths of 12m.The power to weight ratio of this rig cannot be beaten.

Klemm 702

The Klemm 702 is a restricted access rig which can produce excellent weight to pile diameter results. Capable of drilling 508/450mm case and auger piles to a depth of 26m and SFA piles to depths of 16m. With the ability to work remotely up to 50m from the power pack via umbilical hoses, the rig is an excellent choice for basement works, or working within existing buildings for floor or mezzanine upgrade works.

Klemm 708

The Klemm 708 is ideal for tight access sites where umbilical hoses would cause a logistical issue. Capable of drilling 508/450mm case and auger piles to a depth of 26m and SFA piles to depths of 18m. At 10tonnes the rig is ideal for renovation works from an existing slab or minimally designed piling mats.

SoILmec SR75

Our SR-75 Blue Tech model rig can operate in rotary and CFA modes and is the extended mast version with wider tracks for stability, has remote tracking for loading/unloading and dual auger cleaner to improve auger cleaning efficiency. In rotary (LDP) mode it can be fitted with a locking kelly bar to bore to depths of 70m at diameters ranging from 450mm to 1900mm. In CFA mode it can be configured in multiple configurations (4 line and 2 line) to meet site requirements. CFA bored lengths of up to 31m and diameters ranging from 350mm to 1200mm can be achieved.  The rig has a weight of about 80tonnes and has a Euro stage V engine

Klemm 709-2 and 709-3

The Klemm 709-2 and the 709-3 are excellent mid-range rigs with respective weights of 13.5 and 18.5 tonnes.  Both rig types are capable of installing case and auger piles with diameters up to 660/600mm and to depths of 32m dependent on ground conditions. The 709 can also install SFA piles to diameters of 600mm overcoming the problem of operating a full size CFA rig on smaller sites or where restricted headroom exists.